Cleaning A Goodman Flame Sensor
Cleaning A Goodman Flame Sensor. Electric multimeters can measure many metrics. If you can see a thin piece of wire that ends in the flame area, that’s likely the sensor.
For more detailed guide, visit out furnace flame sensor cleaning guide Slowly remove the flame sensor. To clean it, you first need to turn off the furnace and turn off the gas intake, and only then can we remove the sensor.
To Clean The Flame Sensor Rod:
Turn off the furnace power; Test it again to see if it works well now. Electric multimeters can measure many metrics.
Shut Off The Power Supply To The Furnace.
Once you successfully locate the sensor, you need to clean it. Clean the sensor with an emery cloth; Rub the flame sensor with steel wool to remove any build up.
It Has A Dirty Flame Sensor.
A lingering burner flame might also be the issue. If all your furnace flame sensor needs is a good cleaning to restore functionality, we can walk you through the correct cleaning regime. Small piece of light grit sandpaper, steel wool, or emery cloth;
Locate The Flame Sensor The Furnace Flame Sensor Is A Thin Piece Of Wire With A White Ceramic Base.
Remove the flame sensor by unscrewing it from its position. A flame sensor is triggered by a lit pilot light when the power button or ignition key is pushed. The process of cleaning a furnace flame sensor.
To Clean The Sensor, Simply Rub The Metal Rod Gently With Light Grit Sandpaper, Steel Wool, Or Emery Cloth To Eliminate The Carbon Buildup.
A dirty or blocked flame sensor will therefore make the furnace shut off when it should stay on. For a furnace that is cycling on and off, the problem is usually the flame sensor. If it requires cleaning, it means that the porcelain portion is covered in soot or dirt or has undergone corrosion.
Post a Comment for "Cleaning A Goodman Flame Sensor"