Goodman Furnace Clean Flame Sensor
Goodman Furnace Clean Flame Sensor. Never use sandpaper as it will damage your flame sensor’s rod. Turn off the furnace power;
The process of cleaning a furnace flame sensor. The igniter is working fine; Therefore, the flame sensor of a goodman furnace requires a little bit of care occasionally to ensure that the furnace is working as well as it can.
After Cleaning Or Replacing The Flame Sensor, Remember To Remount It.
When you’ve finished cleaning the sensor, reseat it in the burner housing and secure it with the mounting screw. We use cookies to give you the best possible experience on our website. Just remove one sensor and replace it with a new sensor.
The Sensor Is A Short Length Of Thin Metallic Rod That Creates A Small Current Of Electricity In Order To Confirm There Is Fire Burning Within The Furnace.
Goodman 80% furnace dirty flame. Use clean paper or a towel to clean the corrosion. Clean the sensor with an emery cloth;
Reconnect The Wire To The Sensor Terminal.
The valve handle on the gas pipe will allow you to stop the gas flow and turning off the furnace breaker. I would suggest checking all connections to make sure they are tight (especially the ground connection on the transformer). Remove this screw and slide the sensor out gently.
If It Doesn’t, Replace It.
To clean the sensor, simply rub the metal rod gently with light grit sandpaper, steel wool, or emery cloth to eliminate the carbon buildup. I cleaned the flame sensor. Your goodman furnace had sensed a flame without a call for heat.
Once You Successfully Locate The Sensor, You Need To Clean It.
Your goodman furnace will not stay lit if the sensor is dirty. If your goodman furnace flame sensor is dirty, follow these diy steps to clean it: Therefore, the flame sensor of a goodman furnace requires a little bit of care occasionally to ensure that the furnace is working as well as it can.
Post a Comment for "Goodman Furnace Clean Flame Sensor"