Skip to content Skip to sidebar Skip to footer

Reset Throttle Position Sensor Nissan

Reset Throttle Position Sensor Nissan. 100 miles is this true that they have to. Wait exactly 7 seconds then hold accelerator pedal.

Throttle Position Sensor 18919VK500 For
Throttle Position Sensor 18919VK500 For from www.amazon.com

Next is on the throttle valve closed position learning. In addition, the sensor detects the opening and closing speed of the throttle valve and feeds the voltage signal to the ecm. To disconnect the throttle position sensor and reset it, you have to disconnect the sensor from its connection with the electrical system.

Throttle Valve Closed Position Learning.


Accelerator pedal position sensor has two sensors. This can be as easy as simply disconnecting the throttle sensor from the negative cable connected to the battery. Wait exactly 7 seconds then hold accelerator pedal.

And This Should Complete This Reset Programing.


Start engine and warm it up to normal operating temperature. Perform “throttle valve closed position learning”. Diagnostic trouble codes (dtc) stored in the pcm's memory:

If The Throttle Position Sensor Is Broken, The Information Cannot Be Transfer To Computer, And The Gear Cannot Be Changed, Further Leading To Your Nissan Cannot Start.


Depress accelerator pedal fully 5 times within 5 seconds. The sensor detects the accelerator position and sends a signal to the ecm. The dealer and they said it would cost.

Even After You Set The Throttle Position Sensor (Tps) You Need To Reset The Tps Idle Position Memory And Then Check The Timing/Idle Mixture Ratio And Make Any Adjustments There If Needed.


Tags auto gearbox throttle position sensor throttle sensor tps tps problem. And looked up about 7 different ways to. Turn the ignition switch “off”, and wait at least 10 seconds.

Wait 7 Seconds And Fully Press The Accelerator Pedal And Hold For Approximately 20 Seconds Until The Check Engine Light Stops Blinking And Stays On.


Steps on how to program a throttle position sensor for a throttle valve closed position learning. This is important, as it helps you avoid the risk of electrical shock or causing an error code on your engine control module. Idling issues should disappear easily, but if you’re facing unresponsive throttle and inconsistent performance, your throttle position sensor might need a replacement.

Post a Comment for "Reset Throttle Position Sensor Nissan"