Cleaning A Flame Sensor
Cleaning A Flame Sensor. To clean the sensor, simply rub the metal rod gently with light grit sandpaper, steel wool, or emery cloth to eliminate the carbon buildup. With proper cleaning and maintenance, however, it should keep working optimally for a long time to come.
Do not use sandpaper on any other component in your furnace. Before you begin the flame sensor cleaning process, turn the gas and electricity off to the unit. Clean the sensor with an emery cloth;
Sand Paper Is Too Coarse For The Delicate Metal And Could Result In Damaging Of The Sensor.
Do not use sandpaper to clean the flame sensor rod. As long as the component senses the flame, it sends a message to the main furnace control board. If it doesn’t, replace it.
Indeed, You Can Do It Yourself (Diy) As Long As You Remove The Furnace Access Door To Locate And Detach The Sensor.
You may need to replace it. Remove it and sand it lightly with 150 grit sandpaper or so, (i used a sanding sponge), to remove all the dark carbon off the wire. In this video we show you how to clean a flame sensor.
The Process Of Cleaning A Furnace Flame Sensor.
Cleaning the flame sensor with sandpaper can make it more difficult for the component to successfully sense the flame. Never use sandpaper as it will damage your flame sensor’s rod. Turn off the furnace power switch.
Do Not Use An Abrasive Material Such As Sand Paper!
The process of cleaning the flame sensor is easy. Remove the furnace flame sensor; Gently clean the metal rod at the end with very little pressure.
You Should Clean Your Flame Sensor Because A Dirty Sensor Can Cause Furnace.
Inappropriate contains mature or sensitive content. Just remove the old sensor and replace it with a new, functioning sensor. How to clean a furnace flame sensor (5 steps) step 1:
Post a Comment for "Cleaning A Flame Sensor"