How To Stop A Motion Sensor Light Switch From Turning Off
How To Stop A Motion Sensor Light Switch From Turning Off. Most manufacturers make it a fairly easy process to disable this main feature of the lights. To stop a motion sensor light from turning off all you need to do is to turn the switch off and then turn it on within seconds.
For some models, resetting the breaker is all that is needed. Simply so, how do you reset a motion sensor light switch? In order to prevent constant switching on and off, many motion detectors can be bypassed and switched to permanent light if necessary.
To Stop A Motion Sensor Light From Turning Off All You Need To Do Is To Turn The Switch Off And Then Turn It On Within Seconds.
As mentioned earlier, if your device is battery powered, simply remove the batteries and set them aside. In order to prevent constant switching on and off, many motion detectors can be bypassed and switched to permanent light if necessary. If not, you can try and change the setting on your motion sensor lights, making it more or less sensitive.
Leave It Off For 30 Seconds To One Minute Before Flipping It On Again.
This will ensure that an override is completed and the light will now stay on. Shut the lights off at the breaker and wait a full 30 seconds before turning the power back on. You don't have to disconnect the power to do this.
Flip The Switch To The “Off” Position To Disable The Motion Sensor Light Switch.
I don't think you can use the same switch to disable off as the one you are controlling, at least not exactly so. Place a small strip of black electrical tape over a portion of the detector eye to block motion detection in certain areas and eliminate accidental triggering. Do not set it to auto if it has this function.
That Virtual Switch Is The One You Specify To Disable Turning Off In Motion Lighting.
The action for false is to turn off the switch. As a last resort, cover the entire detector lens with electrical tape to disable the lighting feature altogether. The light should stay off and the sensor should be reset.
To Override The Motion Sensor, Flip The Switch On And Off Twice In Rapid Succession.
Turn off the fixture's circuit breaker for at least 30 seconds. This way, you walk into the room, the motion sensor turns on the wall dimmer to two 70% for example, and you tap the wall dimmer up when increases the light above 70% and that will trigger the virtual switch to turn on, thus disabling the motion. To go back to normal operation, turn the switch off and wait ~10 seconds, then turn back on.
Post a Comment for "How To Stop A Motion Sensor Light Switch From Turning Off"